Excellence in Performance, Heavy-Duty Choice —— 3400700372 Heavy Truck Clutch Kit

Provide strong, reliable, and durable power transmission solutions for your heavy-duty vehicles. Our 3400700372 clutch kit is precision engineered and rigorously tested to ensure outstanding performance under various harsh road conditions and heavy loads, making it a wise choice for professional drivers and fleet managers.

Product Core Advantages

• Superior Durability: Utilizing high-strength pressure plate springs and special friction materials, it resists wear and high temperatures, with a service life far exceeding industry standards, effectively reducing the frequency of replacements and downtime.
•  Smooth Engagement: The optimized friction disc design ensures smooth and gentle clutch engagement, significantly reducing the impact load on the transmission system, enhancing driving comfort, and protecting the gearbox.
• Powerful Transmission: Capable of withstanding high torque loads, power transmission is efficient and direct, without slippage, ensuring that the engine power is transmitted to the drive wheels without loss, especially suitable for hill starts and heavy-duty conditions.
• Comprehensive Compatibility: This kit is specifically designed for designated models of heavy trucks, with original factory quality, perfect match, and easy installation.

Product Specifications

| Part Number | 3400700372 |

| Product Type | Clutch Kit (including pressure plate, friction disc, and release bearing) |

| Applicable Models |  | Iveco, Volvo, Mercedes-Benz, Scania, and other heavy-duty trucks |

| Outer Diameter Size | Ø430 mm  |

| Keyway Specification | 10 Teeth - Inner Diameter Ø125mm  |

| Torque Capacity | ≥ 1500 Nm |

| Friction Material | Organic Non-Asbestos Composite (NAO), high temperature resistance, high friction coefficient |

| Disc Type | Diaphragm spring type with reinforced rib design |

| Separated Bearing Type | Maintenance-Free Self-Centering Ball Bearings |

| Packing List | Clutch Pressure Plate x1, Clutch Friction Disc x1, Release Bearing x1, Alignment Tool x1 |

Installation and Maintenance Recommendations

• Professional Installation: It is strongly recommended that the installation be carried out by a professional technician at a formal repair shop. During installation, it is essential to clean and inspect the flywheel surface and replace the crankshaft rear oil seal to prevent contamination of the new clutch with oil dirt.
• Proper Running-in: After the new clutch is installed, it needs to be run in gently for about 500 kilometers. Avoid sudden acceleration, heavy loads, and semi-linkage operations to ensure that the friction surfaces are fully engaged, perform at their best, and extend their lifespan.
• Regular Inspection: Regularly check for leaks in the clutch slave cylinder and master cylinder, and ensure that the free travel of the clutch pedal is within the standard range.

About Us —— Shaanxi Bowen Hongyun Trading Co., Ltd.

Our company is a high-tech enterprise specializing in the R&D, production, and sales of critical components for heavy-duty trucks. With over 8 years of industry experience, we deeply understand the stringent quality demands placed on components for heavy vehicles.
Our mission is to provide safe, reliable, and efficient components for the global transportation industry. Equipped with advanced production lines and a rigorous quality control system, all our products are certified under the ISO/TS 16949 quality management system, ensuring every stage—from raw materials to finished goods—meets the highest standards. We not only deliver premium products but also offer comprehensive technical support and after-sales service, making us your trusted partner.
Our Commitment: Quality First, Service with Sincerity.

Frequently Asked Questions (FAQ)
Q1: Is this clutch kit suitable for my XX brand XX model truck?
A: The part number 3400700372 corresponds to a specific clutch specification. Although it is widely compatible with various heavy-duty truck models, the most accurate way is to provide your vehicle's VIN code (chassis number) or contact our customer service personnel, who will perform an accurate model matching query for you.
Q2: Does the kit include a release bearing and alignment tool?
A: Yes. Our 3400700372 is a complete kit that includes a clutch pressure plate, clutch friction plates, a release bearing, and a special alignment tool for centering during installation, providing you with a one-stop solution.
Q3: Does the new clutch need to be broken in? How should I do it?
A: It is very necessary! Proper break-in is crucial for the life of the clutch. It is recommended to avoid rapid acceleration, high-speed gear shifting, towing heavy loads, and prolonged semi-linkage (such as long periods of low-speed crawling) within the first 500 kilometers after installation. Maintain smooth driving to allow the friction plates and pressure plate to gradually achieve perfect fit.
Q4: My car's clutch feels heavy and difficult to press down; can replacing this kit improve it?
A: Clutch pedal heaviness is usually not directly related to the clutch kit itself; the problem may lie in the separation mechanism (such as the release fork, clutch slave/master cylinder) or the cable. Replacing the new clutch kit may slightly improve the situation, but it is recommended that you also check and lubricate the entire clutch operating mechanism to thoroughly solve the problem.
Q5: Do your products have a warranty?
A: Yes. We offer a limited warranty of 12 months or 100,000 kilometers on this clutch kit (whichever comes first). For specific terms, please refer to the warranty card attached with the product or consult our sales staff.
Q6: How can I tell if my clutch needs to be replaced?
A: Common signs include:
• Slipping: Engine speed increases but vehicle speed improves slowly, especially noticeable under heavy load or uphill conditions.
• Incomplete separation: Difficulty in shifting gears or a clunking sound from the transmission when pressing the clutch pedal.
• Vibration: Abnormal vibration occurs when starting the vehicle.
• Unusual feel of the pedal: Increased, heavier, or softer pedal travel.
• Unusual noise: Abnormal sounds when pressing or releasing the pedal.
If you encounter any of the above situations, please inspect them promptly.

Why choose us?

We deeply understand that making a decision among many options is not easy. We believe that through the following four core strengths, we can not only meet your needs but also exceed your expectations and become your most trusted long-term partner.

1. Comprehensive and Swift Customer Service

Our service philosophy is "Starting with Needs, Ending with Satisfaction." What we offer is not just products, but a complete set of worry-free solutions.
• Professional pre-sales consultation: We have an experienced team of consultants who are not only sales experts but also industry advisors. They will patiently listen to your specific needs and application scenarios, provide professional and constructive advice, help you make the most optimal choices, and avoid making wrong investments due to information asymmetry.
• Efficient in-sales support: From order confirmation to production and delivery, we have dedicated order managers tracking the entire process. You can always keep track of the order progress, and any questions can be answered promptly and clearly. We ensure the process is transparent, giving you peace of mind throughout.

2. Highly Flexible Customizable Products
 

We understand that standardized products cannot meet the unique needs of all customers. Therefore, "deep customization" is our core strength.

•  Modular Design Concept: Our products adopt an advanced modular design. This means you can freely choose functional modules, configure parameters, and design aesthetics on a mature platform like "building blocks," thus achieving personalized needs while ensuring the stability and reliability of the base platform.
• Flexible Production Capacity: We have advanced production lines and experienced engineering teams that can quickly respond to small batch, multi-variety custom orders. Whether it's size, material, function addition or subtraction, software interface, or brand LOGO implantation, we can efficiently implement them to ensure you get a product "born for you."
•  Collaborative Development Model: For customers with extremely special needs, we open a collaborative development channel. Your technical team can communicate directly with our R&D engineers to start from the design source and create a unique solution that fully aligns with your vision.

3. Reliable and worry-free quality assurance system
   

        Quality is the lifeline of a company, and we build a solid line of confidence for you through our systematic quality assurance system.

• Strict quality control: We start with strict supplier selection standards from raw material procurement. During the production process, we follow international quality management systems such as ISO 9001, ensuring rigorous quality inspection (IQC, IPQC, FQC) at every step to ensure zero defects in the products leaving the factory.​
•  Extended warranty period: We are confident in the quality of our products, so we offer warranties that far exceed industry standards (for example, core components come with a 3-5 year warranty). This is not just a promise but also the most direct proof of our product's excellent quality.
• Comprehensive warranty policy: Our warranty coverage is extensive, offering free repair or replacement services for faults caused by non-human factors. We also provide clear warranty terms without hidden fees, allowing you to truly enjoy worry-free after-sales service. Additionally, we will establish product archives and offer proactive maintenance reminder services.

In summary, choosing us means you are not just selecting a supplier, but rather:

1. A service partner centered around you,

2.  A custom expert capable of realizing your ideas,

3. A quality benchmark that you can absolutely trust,

4. A strategic ally that will accompany you on your global journey.

       We look forward to working with you to create greater value together.

Contact Us:

  Shaanxi Bowen Hongyun Trading Co., Ltd.
  E-mail:18809226406@163.com
  Telephone: +8618809226406
  Whatsapp: +8618809226406
  Address:Auto Parts Happy Port, Sanqiao Street, Weiyang District, Xi'an City, Shaanxi Province, South 20-1